High Speed Printed Circuit Board Router Machine 4 Head 60K RPM
Westwind Spindle
Working Conditions:
| Power Supply: | 3PH-AC380V+N+PE,50HZ |
| Temperature: | 20±2℃/45%-65% |
| Air Pressure: | 6.5-7.5bar |
Product Datas:
| X,Y,Z-axis Stroke | 560mm*700mm*40mm |
| Feed Rate X,Y-axis | 30m/min |
| Feed Rate Z-axis | 15m/min |
| Max. Working Area | 560mm*720mm |
| Spindle Speed | Standard 60KRPM |
| Spindle cooling method | Water cooling |
| Tool Change Mode | Automatic Tool Change |
| Location Accuracy: | 0.005mm |
| Repeat Location Accuracy: | 0.0025mm |
| Spindle Spped: | 60KRPM |
| Tool Change Method: | Automatic |
Our Service:
1, Specific designed to meet differents customers's requirements...
2, 24 hours technical support by email and telephone service..
3, Warranty: 1year for free repair (Except consumables), provide
free technical service support for all life.
4, Provide English manual or operating video.
Descriptions:
Customized & new generation PCB routing machine
QIC System:
Large and small presser foot switching function to ensure small PCB
board’s accuracy
The CBDT electric contact automatic detection broken tool function
is the timely response, no-leak detection for broken tool, it can
be used as a fast drilling function.
Spindle configuration:
ABL/WESTWIND 160-180KTDM high-speed air flotation spindle,drilling
100μm micro-hole stably, good large and slot holes.
Drive System:
Imported high-power, high-torque motor to ensure high spindle
speed.
Transmission System:
Japan NSK high precision lead screw (fast, quiet)
German Rexroth P-precision Linear Guideway(high precision,long
life)
Tool changer:
Upper-tool changer:Capacity 220 / pcs/ axis, tool without collar
can be achieved, short tool change time,convenient for changing the
PCB plates, no need to change the tool holder..
Lower-tool changer:Large capacity of 300, easy to arrange the tool
automatically, operate, tool change, clean the tool, have little
effect on the spindle.
Control software:
Mature, stable advanced software control system, friendly interface
and graphical simulation function, easy learning.
Feedback system:
Imported closed grating ruler, good dustproof and antifouling.
Tool Detection:
Imported tool detection,tool length and tool diameter can be
detected,ensuring the accuracy of the routing.
Pictures:
